LOW ROOF RACK KIT FOR TOYOTA HIACE (2004 - Current) - By Front Runner
A set of Gutter Mounted roof racks used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 130mm Gutter Mount legs, 2 1475mm roof racks, 1 10mm Roof roof rack Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner roof racks to a vehicle with gutters. Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred. The roof racks are mounted directly to the rain gutters using Gutter Mounted Legs. Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The roof racks and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack. Made from stainless steel and a durable, weather resistant black powder-coated aluminum. Includes all hardware, components and the installation guide needed to fit roof racks on a vehicle.
The Front Runner Roof Racks are engineered, built & proven in Africa for unmatched strength, lightness and functionality. Built for on & off-road adventures - these durable & strong pair of Roof Racks are the ultimate rooftop storage system when a full Roof Platform isn't required.
Ideal for to mounting Roof Top Tent's, boards or other accessories where a simple roof storage solution is needed.
The sliding nut t-slots located on both the top & underside of the racks, allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Ideal for awnings.
Manufactured from durable, weather resistant black powder-coated T6 aluminium (bars) & 3CR12 Stainless Steel (feet) these racks can withstand greater stresses than the best all-steel roof racks at 1/3rd less the weight. No plastic or steel to degrade over prolonged periods in tough conditions.
This kit comes with all the components necessary to mount the Front Runner Load Bars to your vehicle, including all hardware and detailed, easy to follow fitting instructions.
For more information on Front Runner Outfitters:
KRRR005 - LAND ROVER RANGE ROVER (1970-1996) AND TOYOTA HIACE LOW ROOF ROOF RACK KIT - BY FRONT RUNNER
2 x LASS102 - No 2 Leg 130mm (Pair) - by Front Runner
1 x LBSK017 - Roof Rack Pair 1475mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
Approximate Installed Weight 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Roof Rack Kit, add the height of the Roof Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Roof Rack kit uses Legs, add the height of the Roof Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.
If your Roof Rack kit uses Foot Rails, add the height of the Roof Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Width 175mm (7")
Length 1565mm (62")
Height 120mm (5")
Weight 8.6kg (18.9lbs)