Ford/Mazda T6/T7 (2012-Current) Roof Rack Kit / Track & Feet - By Front Runner
A set of roof racks with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 2 50mm Feet, 2 60mm Feet, 2 1255mm roof racks, 2 Ford Ranger 1200mm Tracks, 1 10mm Roof roof rack Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner roof racks to the vehicle.
These roof racks are mounted to the vehicle’s roof via a set of supplied Tracks and Track Mounted Feet. Can be used to mount a Feldon Roof Top Tent or other accessories where a low profile and smaller footprint is preferred. Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The roof racks and mounting system can be used in the future as components to build a complete Front Runner Roof Rack. Made from stainless steel and a durable, weather resistant black powder-coated aluminum. Includes all hardware, components and the installation guide needed to fit roof racks on a vehicle.
The Front Runner Roof Racks are engineered, built & proven in Africa for unmatched strength, lightness and functionality. Built for on & off-road adventures - these durable & strong pair of Roof Racks are the ultimate rooftop storage system when a full Roof Platform isn't required.
Ideal for to mounting Roof Top Tent's, boards or other accessories where a simple roof storage solution is needed.
The sliding nut t-slots located on both the top & underside of the racks, allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Ideal for awnings.
Manufactured from durable, weather resistant black powder-coated T6 aluminium (bars) & 3CR12 Stainless Steel (feet) these racks can withstand greater stresses than the best all-steel roof racks at 1/3rd less the weight. No plastic or steel to degrade over prolonged periods in tough conditions.
This kit comes with all the components necessary to mount the Front Runner Load Bars to your vehicle, including all hardware and detailed, easy to follow fitting instructions.
For more information on Front Runner Outfitters:
KRFM013 - Ford/Mazda T6/T7 (2012-Current) Roof Rack Kit / Track & Feet - by Front Runner
1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
1 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x LBSK014 - Roof Rack Pair 1255mm(W) - by Front Runner
1 x TRFR001 - Ford Ranger (2012-Current) Tracks / 1200mm(L) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
Approximate Installed Weight 8kg (18lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Roof Rack Kit, add the height of the Roof Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Roof Rack kit uses Legs, add the height of the Roof Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.
If your Roof Rack kit uses Foot Rails, add the height of the Roof Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Width 250mm (10")
Length 1360mm (54")
Height 110mm (4")
Weight 9.3kg (20.5lbs)
KRFM013 - FORD/MAZDA T6/T7 (2012-CURRENT) LOAD BAR KIT / TRACK & FEET - BY FRONT RUNNER
We offer installation for all products at our Auckland based West Supply Workshop! Simply choose installation during checkout.
If you're gonna give it a crack yourself, here's all the info you need:
View the component installation guides here: